Beautiful Morton & Hersloff 36 built in Easton Maryland on a Gloucester Marine hull. Very well appointed interior and exterior. Originally powered by a 165HP Perkins. Re-powered and refitted in 1995 to include a new 315HP Cummins Diamond Edition 6BTA diesel engine with 780 original hours, 8KW Onan generator with 600 hours, Two 12,000 BTU reverse cycle heat and air units. Cruises efficiently at 2000 RPM making 9 knots displacement speed at 2 miles per gallon. Videos taken on 7-8-16 are posted under the external links after the disclaimer on one site and after photo #9 on the other.
Fresh out of the boatyard with two coats of Pettit Ultrima SR60 ablative bottom paint & zincs.
This is our personal boat. We recent finished cruising to the Bahamas. A 2,500 mile journey. Went anywhere and everywhere. The boat is exceptionally dependable. This boat has been loved. A reasonable offer will be considered!
Please email or call with any questions.
Stateroom with large V-berth & ample drawers below, Hanging locker, in-suite sink with mirror. Enclosed head compartment with electric marine head with holding tank, stall shower, hanging locker.
Galley down with dual stainless steel sink, two burner flattop electric stove, microwave oven, AC/DC refrigerator & freezer.
Upper and lower helms. Lower helm has 12 volt engine take off heater.
Large salon area with lounge that converts to berth to port and very unique foldaway (murphy bed) berth to starboard. Storage below port lounge, hanging locker aft of murphy bed. Aluminum windows throughout.
Morton & Hersloff built yachts ranging from 31' to 42' in Easton Maryland. This is a Charles Whittholz design famous for many classic Cheoy Lee power and sailboats.
Upper steering helm rebuilt 2015
Two new 8B batteries 2014
Interior repainted 2015
New salon cushions 2016
Exterior topside from rubrail up refinished 2016
Two anchors, one Danforth / one Plow
Swim platform refinished 2016
Alternator replaced 2016
New Pettit Ultrima SR60 bottom paint. Two coats, blue 9/16
Lumitec underwater stern light installed 2016
New factory upgrade freezer door 2016
Grand Banks cocktail table
Two new Shakespeare 8' Galaxy VHF antennas on stainless steel mounts 2016
New Lenco trim tab actuators, control and switches installed 2016
raw water thru-hull fitting, pump, hoses and switch installed 2016
Cutlass bearing replaced 2016
Shaft and steering log repacked 2016
Four new Lee rodholders installed 2016
New 15' Outriggers installed 2016
2015 West Marine 9' Water Tender dinghy with oars mounted on the swim platform with Weaver davits.
Three forward hatch and anchor windlass cover new 2016
New Simrad autopilot 2016
Oil and filter changed on main engine and generator 6/9/16
New main engine serpentine belt installer 6/9/16 (original belt kept as spare)
and there is no 62" flatscreen.