The Moorings 44.3 is a new blue water design focusing on functionality and open-air living. Generous interior volumes, a large cockpit with dual helm and a high level of technology and craftsmanship combine to provide reliability, comfort and an elegant finish. The layout features 3 cabins each with en suite shower and head, a U-shaped salon to starboard and a practical galley to port with ample work surfaces. Generous capacities for water and fuel, as well as personal gear and food stores, mean increased comfort and autonomy on the water.
Additional Specs, Equipment and Information:
Hull Shape: Monohull
LOA: 43 ft 6 in
Beam: 14 ft 6 in
LWL: 38 ft 3 in
Dry Weight: 21120 lbs
Engine Option 1: 2x
Fresh Water Tanks: (137 Gallons)
Fuel Tanks: (58 Gallons)
Number of heads: 3
Self-draining cockpit with nonslip GRP floor.
Large cockpit benches with nonslip finish.
Cockpit coamings: for greater comfort and increased safety.
Large GRP cockpit table with hinged leaves, quick and easy to put in position, giving excellent freedom of movement and welcoming space around the table.
Table fitted with a locker, glass holder, bottle rack and handrail, as well as a forward-sloping panel to take the electronic navigation screen.
The cockpit is fitted with 2 large
lockers to port and starboard for increased stowage space and comfort when sailing.
Cold water shower to starboard.
Built-in liferaft stowage on deck aft of cockpit with easy access and opening.
A hinged door over the liferaft locker to close the cockpit and for ease of access to bathing platform.
1 engine battery (12V, 110A).
2 service batteries (12V, 2 X 140A).
Back-lit, 16 switch 12V electrical panel with 3 x 220V switches.
The 12V circuit is protected by fuses (one per switch).
The 220V circuit is doubly protected: one thermal breaker per switch and a main 30mA differential circuit breaker on the panel.
Double backstay with bottlescrews and 2 chainplates.
1 classic forestay.
1 stemhead plate.
Sails & Running Rigging
1 mainsheet led back to cockpit.
1 main halyard led back to cockpit.
1 boom topping lift with cleat on mast.
2 reefing lines and 2 Cunninghams led back to cockpit.
1 mainsail foot outhaul led back to cockpit.
1 boom vang with 4-part tackle led back to cockpit.
2 genoa sheets.
1 genoa halyard with jammer on mast and one cleat.
2 mainsheet U-bolts on coachroof.
6 jammers to starboard : mainsail outhaul, main halyard, reefs 1 and 2, mainsheet, boom vang downhaul.
2 jammers to port : Cunninghams for reefs 1 and 2.
1 six-sheave deck organiser and 1 three-sheave deck organizer.
1 mainsheet tackle with U-bolts on coachroof and led back to cockpit.
1 PROFURL genoa furling gear and furling line.
2 blocks, 3 lead blocks and 1 stopper for genoa furling line (led back to cockpit).
2 genoa tracks (L 1500) and adjustable cars with pin stops.
2 single genoa sheet return blocks.
2 genoa sheet winches
1 halyard winch on coachroof to starboard.
2 aluminum winch handles with 2 pockets.
1 furling genoa with UV strip, 110% overlap for ease of handling.
1 mainsail and slides with 2 reefing
1 lazy bag with Moorings logo.
Hull & Deck
The hull is single-skinned balsa sandwich construction with reinforcement
A built-in structural inner moulding is bonded and laminated to the hull at intervals. Its structural role is important as it takes and absorbs the stresses at pressure points (keel, rudder, etc.) and spreads any loads guaranteeing reduced strain on the hull.
The inner moulding with its perfect
surface gives extra stowage space under the sole and makes cleaning easier.
A skeg is moulded into the hull to protect the propeller shaft.
Prevention against osmosis by use of vinylester resin.
The gel coat is white.
The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio as well as excellent sound and thermal insulation.
A ?diamond point? non-slip surface increases safety over all areas of movement on deck.
There are solid reinforcement points under the deck fittings (winches, tracks, chain plates, cleats).
A built-in inner deck moulding completes the deck structure and helps to perfect its finish.
A straight deck line with an aluminium
toerail forms the hull/ deck joint. This join ensures a watertight assembly and improves safety when moving around on deck. The transom/ hull joint is secured with a rubber rubbing strake.
To improve durability the keel is given an anticorrosion treatment using epoxy based coatings and paint.
Your form has been submitted successfully. A representative will be in touch shortly
Request cannot be completed
You may have entered incorrect information or server is temporarily down. Please reload this page and try again later.