In 1994, Seawind Catamarans launched the first Seawind 1000. A 33 foot cruising catamaran with a unique design and modern lines. In that same year, the Seawind 1000 won the ?Australian Cruising Boat of the Year?, the first time such an award had been bestowed on a Catamaran. Since then over 100 boats have travelled down the Seawind 1000 production line and into the hands of their new owners, anxious to begin cruising on their new dream boat. Designed to cope with the rugged and variable conditions of Australia?s coastline, the Seawind 1000 is widely considered a great ocean going yacht due to design features such as flared hulls for additional buoyancy, triple point reefed mainsail to easily de-power, and foam core construction for additional strength, just to name a few. However the Seawind 1000 is also one of the best designs for entertaining guests or taking the family sailing as a result of the uniquely designed cockpit and saloon.
Additional Specs, Equipment and Information:
Hull Shape: Catamaran
LOA: 33 ft 0 in
Beam: 19 ft 5 in
Maximum Draft: 3 ft 3 in
Dry Weight: 10000 lbs
Engine Option 1: 2x 9 HP
Fresh Water Tanks: (89 Gallons)
Fuel Tanks: (27 Gallons)
Dining table: F/G in centre cockpit. Folds down to create double bed.
American Oak used for interiors.
Slides and cabin top lined with frontrunner carpet and vinyl.
Common area - soles timber - teak with holly inlay. Finished in high gloss two pack polyurethane (Estapol) finish ? four coats..
Cabin soles carpet.
Cockpit cushion seats and backrests in Saloon
Solid doors on all private cabins
Mattresses to be 4" foam upholstered
Solid lockable door.Oak/Ash/Cedar exterior finish with waterproof laminex interior finish
PAR manual toilet
Sullage tank built in. Pump out by shore station
Pipes, skin fittings and seacocks to be easily accessible and to meet MSB survey requirements
Vanity basin with pressure fresh water
Fresh water shower with flexible hand-held hose
Electric shower bilge pump with direct overboard discharge
Cupboard/shelves to very high quality
Custom made electrical switch panel with circuit breakers. Very high quality throughout.
Tinned wire used throughout.
2 x heavy duty batteries. BESCO 487 (or equivalent).
230amp heavy duty isolation switch.
Solar Panels: 2 x 75 watt solar panels.
BP brand (or equivalent).
All cabins with individual lighting.
Galley/saloon area - 2 x fluoro lights.
Diffused lights over aft deck - 2 lights.
Centre cockpit lighting.
Maxie 2 burner LPG stainless steel stove with griller. Flame failure device fitted to shut off LPG immediately in event of flame going out.
2 bowl stainless steel double sink.
Pressure fresh water system. Whale single tap.
Laminex galley tops, cupboards with perspex sliding front.
Refrigerator with attached separate freezer. 12volt Eutectic system by ICEER.
Drop-down dinette table finished in matching laminex and decorative timber.
Dinette upholstered. Seats 4? foam with backs 2?.
Twin Yamaha 10hp engines. Mounted under each helm seat at each steering station.
Remote electric key start.
Dual engine controls at starboard helm station.
Hatches (6 in total)
x Forward Hatches Aluminium frame 500 x 500 (Gebo)
2 x Mid cabin hatches. (Gebo)
2 x Aft cabin hatches (Gebo).
4 x Mooring cleats.
1 x Anchor cleats.
Forward catwalk swim ladder - hinges under hinged catwalk.
Ventilation: 2 x Dorade vents (PVC ? Seabird?).
Mast base turning blocks RF 1350.
Saddle at base of mast for halyard attachment.
8 x Rope clutches - Spinlock brand..
Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. 600mm high to meet Australian survey requirements..
4 x access gates with pelican hook releases.
1 x manual bilge pump. (Survey boats have 3 manual pumps).
Mast / Boom / Sails
Mast and boom by Tempo Spars. Mast
Tempo Section Anodised clear.
Double Spreader, 7/8 rig.
Standing Rigging - All fitted with
Sealock turnbuckles and end fittings.
Forestay 3/8 (10mm) 1 x 19 wire
Sidestays 3/8 (10mm) 1 x 19 wire
Diamonds 5/16 (8mm) 1 x 19 wire
Hinged mast base to allow for lowering on boat.
Halyards - Main halyard: 10 mm Spectra rope : Heavy duty shackle.
Genoa halyard: 10 mm Spectra rope.
Heavy duty shackle.
Topping lift: 8 mm Spectra, Heavy duty shackle.
Spinnaker Halyard: 10mm rope with snapshackle spliced to end.
2 x mainsail reefing lines fitted.
All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches (Spinlock).