Nearly new Oyster 655 commissioned in 2011.
GRP hull is hand laid up single skin to Lloyds approved design specification.
Outer hull laminate incorporating Carbon/Kevlar laminate. The hull is insulated with foam core and an extra layer of fiberglass to increase interior comfort and reduce condensation and noise. Built in compliance to the European Union’s Recreational Craft Directive (EURCD) category A ‘Ocean’
Cutter rig with in mast furling
Shoal draft high performance bulb (HPB) external lead keel
Fully protected skeg-hung rudder
Deck structure moulded in GRP with balsa core
Oyster deck saloon profile with ‘g5’ styling
Teak laid decks
Oyster Design Group
8 Knots (approx)
11 Knots (approx)
2,000 Litres (528 US Gallons)
1,250 Litres (330 US Gallons)
1 x PERKINS 187HP
Perkins Sabre M185C 136kW
Whitlock ‘Mamba’ torque rod and gearbox steering systems
Onan 17.5kW 50Hz 240V (upgraded)
220 V AC 50 Hz / 24VDC SUPPLY
Mastervolt 2500 W Invertor
2 x 220 V 50 Hz 30A shore power cable and extra socket
Upgraded to 820 Amph Rolls Surette
Emergency link for genset and engine start batteries.
Additional Mastervolt 100 Amp Battery charger
2 x Stoway 16.000 BTU Reverse Cycle in Salon.
16.000 BTU unit for aft cabin and 10.000/ 7000 BTU in guest cabins with remote air handlers
BOWTHRUSTER: Sleipner tunnel thruster 15HP
PROPELLER: Brunton Varifold 4-bladed feathering Propeller with Ambassador rope cutter on shaft
WATERMAKER: Seafresh 206A with fresh water auto-flush producing approximately 120 l/hour
HYDRAULICS: Lewmar 400 commander system located in sail locker to operate headsail furling, staysail furling, starboard windlass
BILGE PUMPS: Jabsco engine driven pump off engine with manually operated clutch system. Additional electric bilge pump & High level Bilge Alarm
Interior Joinery finished in satin varnished teak
Two double berths and two twin berths in four cabins, excluding the saloon
Forward port cabin lower berth convertible into double bed
Flyscreens to all opening hull and coachroof ports.
White Hella fans for all berths, galley and owners head.
TWIN GUEST CABIN FORWARD
Upper and lower single berths. Bottom berth pulls out to make double berth and top berth can fold down to make settee with upholstered back. Large drawer beneath lower berth.
Alpine CD stereo player with tuner and Ipod station.
Ensuite bath and toilet with separate shower stall in Avonite goldmine gloss finish with additional Par Quietflush in lieu of standard and varnished teak ‘v’ groove floors.
STARBOARD DOUBLE GUEST CABIN
Double berth with locker above. Full size chart drawer for ½ fold Admiralty charts. Dual drawers and under-berth locker, hanging locker with drawer and locker below. Stowage below berth and sole.
Sony 19” TV and Alpine DVD/CD stereo player with tuner and Ipod station.
Ensuite bath and toilet with separate shower stall in Avonite goldmine gloss finish and varnished teak ‘v’ groove floors.
The saloon features a large, L-shaped settee to starboard and a slightly smaller L-shaped settee to port. Clam style dining table for eight which rotates and telescopes up and down. Two large opening salon windows provides excellent ventilation. Navigation table is to starboard aft of the L-shaped sofa.
Steps lead down from navigation area into passageway, with 3 door access to engine room. Storage below all sole boards with lifting rings.
STARBOARD TWIN CABIN
Upper and lower berths
Full width cabin with queen sized berth and settee to starboard and a compact work desk/vanity top. 26” Sony TV and Alpine touch screen DVD/CD/Tuner with Ipod interface All connected to Alpine subwoofer and 5 Gallo speakers.
Ensuite bath and toilet with separate shower stall in Avonite goldmine gloss finish with Par Quietflush toilet in lieu of standard and varnished teak ‘v’ groove floors.
Hull no 15.
Excellent opportunity to acquire a nearly new Oyster 655 commissioned in July 2011 at an exceptional competitive price.
Blue Horizon obtained top results in the Oyster regattas and she almost appears better than new after two crossings and a very meticulous owner that has attended to every warranty item.
Inspections highly recommended.
A complete list of exclusions is available upon request.