Sly 42 Fun expresses the in way to enjoy sailing: fun, life on board marked by large external areas, fast hull, easy-to-use sail plan (furling mainsail and self-tacking jib), fittings geared towards maximum liveability. Designed by Studio Lostuzzi, the Sly 42 Fun interior and exterior layouts are by Stefano Pastrovich.
Additional Specs, Equipment and Information:
Hull Shape: Monohull
LOA: 41 ft 10 in
Beam: 12 ft 5 in
LWL: 36 ft 6 in
Maximum Draft: 8 ft 2 in
Displacement: 14109 lbs
Ballast: 5401 lbs
Dry Weight: 14109 lbs
Engine Option 1: 1x 40 HP
Fresh Water Tanks: (70 Gallons)
Fuel Tanks: (44 Gallons)
The standard version include one open space (with the galley, the dinette and a large double bed), 1 cabin
and 1 head compartment.
The fittings arrangement guarantees easy movement from one part of the yacht
to the next, considerable stowage space, comfort and class.
The furniture and the bulkheads are in marine
plywood and in composite (Laricross ®) respectively with visible sections in teak and enamelling.
trims are solid wood.
The light colouring of enamelled sections along with the timberwork provide the
interiors with a sensation of a light-filled, spacious atmosphere.
Spacious and comfortable, the saloon is aired via two adjacent hatches above the coach roof.
storage units, above the sofa backrests, make easy the stowage.
All sofas are fitted with cushions, which
have removable covers as standard in non-stain, flame-proof microfibre fabric.
The top ceiling are in marine
plywood, removable and finished in scai leather.
The 12 V electrical circuit is supplied via three 120 Ah service batteries.
Via the alternator dependent on motorization.
Quick 40 Ah battery-charger, 220 V supply (via socket
protected by a circuit breaker), electrical cable.
A 12 V electrical panel is located above the chart table.
The electrical panel also provides information on
voltmeter consumption, 12 V, Ah 12V, voltmeter 220 V, level indicator of water and diesel tank.
socket 12 V, plug 220 V, is located below the panel.
Lighting and sockets
Halogen lighting (spotlights and reading lamps) provide light to the various spaces for greater comfort.
spotlights in the forward berth
reading lights in the forward berth
spotlights in the head compartment
spotlights in the saloon
spotlights over the galley
spotlight in the aft cabin
reading light in the aft cabin
navigation, engine, mooring and deck lights
A number of sockets are fitted (in the galley and near the instruments panel).
Teak top work with high coaming in solid wood around the work surface to avoid falling objects.
steel double sink with mixer tap.
The 145L refrigerator with separate compartments.
bin below the top work.
Shelving unit below the top work and drawer unit with container basket.
gimballed 2-burner hob and oven have a steel burner-protection bar.
Model and manufacturer: VOLVO D2-40
Power: Hp (Kw) 40 (29)
Propeller power: Hp (Kw) 38 (28)
Starter motor (2 kW)
Alternator: 12V/115 Ah
Single lever remote control
Display provided by the constructor
Folding ?duck-billed? type propeller
The ignition and engine control panel is located to the side of the helm.
The fuel tank is centrally located in the tunnel below the cockpit, between the two aft cabins.
It has a 120
litre capacity and is equipped with a level indicator.
A 44 Ah/730 starter battery is specifically dedicated
to engine ignition and separated by the consumption batteries.
In case of need the consumption batteries
can be used for the engine ignition.
Recess moulded sandwich with E-glass and carbon fibre
surfacing, PVC and epoxy resin core, the latter
guaranteeing hull protection against osmosis.
bulkheads are of 27 mm ?Laricross ®? sandwich
panelling, except for the mast bulkhead which is of
The structure (cage), with recess-moulded
frame floor of carbon fibre, laminated with epoxy resin,
ensures the spread of all stress and pressure points to
guarantee equal and reduced strain on the hull.
The hull and deck are glued on a 120 mm overlay flange.
The hull, deck and cockpit will have a white gel-coat finishing.
On the coach roof, cockpit deck and walkways,
a non-slip finishing is provided by a special coat of ice white ?Awl-Grip?.
Wire steering with chain is composed as follows:
1.000 mm diameter aluminium wheels
2 steering columns of plastic reinforced by incorporated fiberglass
1 aluminium quadrant
Stainless steel wires
Pinions with chains
Aluminium emergency helm
In anodised aluminium:
2 forward cleats
2 aft cleats
Pulpits and stanchions
The pulpits and stanchions are in 25 mm diameter, 2 mm thickness, mirror-finish AISI 316 stainless steel
tubing (the two forward stanchions on each side are provided with little wheels against sails friction).
Two guardrails in 5 mm diameter stainless steel cable with own rigging screws.