SUN VOYAGER 28 is the comfortable displacement family or charter boat with a choice of power options. Eight big windows enlarge optical the saloon and are ensuring exceptional viewing for navigation from inside helm. SUN VOYAGER 28 has spacious living accommodation, large decks, a solid and beautiful finishing, economic sailing qualities and less maintenance. Quality and price compare very well to competition.
Additional Specs, Equipment and Information:
Designer: Andrzej Skrzat
Hull Shape: Deep Vee
LOA: 28 ft 2 in
Beam: 8 ft 4 in
Dry Weight: 3527 lbs
Engine Option 1: 1x 30 HP
Number of single berths: 5
Sun Voyager 28 Additional equipment
Bow basket with entrance through the bow (surcharge)
Polsters in mahogany
Bow gangway with anchor fastening
Windlass Quick Aries 12 V / 500 W
Window covers with fastenings
Second helm in the cabin with hydraulic steering
Oil heating Webasto Air Top 2000 with 3 outlets
Gas heating Trumatic E 2400
Gas heating + hot water Trumatic C3402
Hot water installation with Trumatic boiler
Fridge (12V, 230V, gas)
Electrical installation 230 V (shore connection, fuse box, 2 sockets)
Additional 100 Ah board battery
Radio VDO with CD player, 4 speakers and installation
Horn on the roof
Additional fresh water tank in the bow
Fuel tank made of stainless steel with the deck outlet
Furniture in the main cabin made of leather
Hot water installation from the inboard engine
Bimini-top over the cockpit
Screen in the sliding hatch cover
Fixed artificial leather cushions in the cockpit
Grill basket with stainless grill
Table in the cockpit
Hot shower in the cockpit (only with hot water installation)
Hot shower in the toilet (only with hot water installation)
The walls in the toilet made of laminate
Antifouling: 3x VC TAR + 2x VC 17 Extra
Marine WC, holding tank 110 L, pump for waste disposal
Reflector with remote control
Polish gas bottles (11 kg + 5 kg)
CQR Anchor with 25 m chain (surcharge)
Additional cleats on the bath platform
4 fenders with fender baskets on the bow
Light on the elevator
Mosquito screens for the gangways and hatches
Guard rail in the gangway
Two opened portholes with mosquito screens in the bedroom
Fender bar made of teak
Overlaps over the windows
Additional helm on the roof
Electrical bow thruster
Cockpit and bow floor made of teak
Bath platform covered by teak
Roof of the cabin covered by teak
Laminate yacht berth
Made with high quality marine plywood
finished with light oak; spray varnished with semigloss polyurethane.
Bow double berth
table for 5 persons
8 big windows made of 8 mm plexiglas.
Demountable seat back-rest on the bow berth, the step by bow gangway.
sink with fresh water
opened round porthole
locker under the berth
2 technical lockers
75 Ah marine battery
lighting: four lamps in the saloon, one lamp in the toilet, two lamps in the stern cabin
two 12V sockets: by helm and in the stern cabin.
laminated module made of gelcoat (stone imitation), including sink with outboard water outlet through cut-off valve.
Fresh water from l tank.
Complete gas installation: 2-flame gas cooker, reducer, ventilated gas bottles container from cockpit accessible, without gas bottle.
Lockers under the seats
Outboard or inboard engine 10-30 HP ( customers choice ),
Helm with steering wheel and remote control outside ( mechanical steering )
Engine protecting groin on the boat's bottom before the engine.
Handmade with glass-polyester laminate (isophthalic resins and gelcoats, powder mats and powder fabrics).
Colours: hull wine red RAL3003.
Yellow plastic film decoration on the boards.
Made with sandwich technology, colour: beige RAL1015.
Fittings (316 AISI stainless steel): bow basket, hand rails on the roof, stern half-baskets, life buoy fixing, four stainless steel mooring cleats, small mast for the 360 ° motor light.
Under the fittings and the equipment installation points laminate layer is additionally thickened up to 10 mm.
Navigational lights: red/green bow light, 360 °, white stern light, motor light,
Reeling bands: two on the bow, one by the helm
Two closed lockers
Closed cover for the engine compartment
Sliding hatch cover with the plate made of plexiglas
Bow gangway with gas servo + door made of Plexiglas
Anchor container, folding anchor 10 kg, 30 m anchor rope