Hekla is a beautifully finished example of the Atlantic 57 design. The owners utilized the artistry of the builders to customize the interior with fantastic results.
Laminated gloss varnished bamboo trim is at once unconventional and beautiful. Bamboo is extremely durable as well as rapidly grown for sustainable harvest. Fabrics were carefully chosen to mimic the leafy colors of bamboo and the combination is most eye pleasing.
Floors in the accommodation were artistically painted with nautical themes then carefully coated with clear urethane and light non-skid to make them completely durable.
Helka has been lightly used and carefully maintained, she's a great performance cruising boat and is ready to go.
Hulls, decks and pilothouse are constructed from vacuum bagged Epoxy resin and high performance uni-glass fabrics cored with “Core-Cell” SAN foam and PVC foam. Additional laminate of Kevlar on the hull bows for extra collision protection.
All exterior surfaces are spray painted with linear polyurethane "AlexSeal"coating.
Crossbeams are built of uni-directional carbon fiber/epoxy with foam cored epoxy/glass bulkheads.
Extensive use is made of uni-directional carbon fiber reinforcement in high load areas of hulls and decks.
Interior joinerwork and floorboards are all cored panels to provide stiffness at low weight.
Propulsion and Steering
Twin Volvo D2-40 (40 HP) diesel saildrive engines
Dual instrument panels with tachometer and engine monitoring gauges and alarms.
Primary and secondary fuel filters.
Dual “ZF Micro Commander” electronic single lever engine controls mounted at both the cockpit helm station and pilothouse inside helm.
ZF remote engine controls
Three blade Flex-o-Fold bronze geared folding propellers
Rudder blades are fiberglass composite, high performance hydrofoil section with solid Titanium rudder stocks turning in low friction bushings.
Carbon Mast and Booms
Carbon Fiber Spars (Mast, main boom, jib boom, forward crossbeam and compression beam) from King Composites.
Painted mast, deck stepped with two sets of rod diamonds over single spreader.
Masthead light, masthead VHF, wind instruments
All halyards and reefing lines are led to cockpit. Anti chafe has been designed and applied.
Boom has internal reefing lines, topping lift
Self tacking jib hardware with Profurl reefing/furling unit
Profurl reefing/furling unit for Genoa jib.
All type 316 1x19 SS Dyform wire rope stays and shrouds
Navtec rod for mast diamond stays
Dyneema halyards and control lines. Low stretch Dacron sheets. Chafe prevention throughout rig.
Mainsail: New 2017 Calvert triradial cut GXLD 30 fabric, a high-performance cruising laminate, 983 sq. ft., true multihull sail design, 3 reefs, 6 full batten pockets, webbing chaff protection full length, both sides of pockets, offshore construction, leech line with exits at reefs, tell tails. Harken batten car system
Genoa: New 2017, 819 sq. ft., offshore construction, foam luff for reefing, Sunbrella UV strip sewn with tenara thread, leech and foot lines, tell tails; Triradial cut Fibercon Hybrid with Dyneema 8.65 oz
Self Tacking Jib: New 2017, 445 sq. ft., offshore construction, foam luff, Sunbrella UV strip sewn with tenara thread, leech and foot lines, tell tails, triradial cut GXLD 30. Profurl roller furling/reefing.
Asymmetrical spinnaker: 2013 Doyle Sails UPS, 1340 sq. ft., with continuous line furler, seldom used, excellent condition.
Harken Radial Winches all recently serviced
One, B60.STEV- electric #60 for mainsheet/main halyard
One, B50.STEH- electric for staysail sheet and reef lines
Two, B60.2STA for reaching genoa/spi sheets
Three, B50.2STA for traveler/runner controls and staysail traveler
Harken Mini-Maxi main sheet traveler 11’6” long
Harken self tacking jib traveler, 12’ long
Harken ball bearing blocks are standard equipment.
Spinlock rope clutches
Two cored glass fiber asymmetric “hi lift” daggerboards in epoxy/glass laminate trunks with low friction bushings
Up and down haul control lead to cockpit
Each hull has two collision bulkheads forward.
(6) Solar Panels, 70 watt output each
24-volt circuit breaker panel
Lithium Ion house battery bank
(2) separate Lithium Ion engine start batteries
Victron Phoenix battery charger 24/25. Universal input accepts both 50 and 60 cycle power.
Custom LED lights throughout cabin and galley
LED red night lighting within the pilothouse
AC Electrical System
(3) Synergy 120v 1500w inverters with custom soft start/auto shutoff module provide power for electric cooking, clothes washer and hair dryer. Outlets in galley and heads.
(1) Victron Phoenix 120v 350W low stand by power inverter provides AC power for low wattage devices. Outlets in all cabins, workbench, nave station, pilothouse steering station and adjacent to settee seats.
(2) composite 100 gallon diesel fuel tanks each with deck fill, shut off and gauge
(2) composite 80 gallon water tanks each with deck fill, vent and gauge
Spectra “Cape Horn Extreme” with dual feed pumps, 14 gal/hr output
Garmin VHF300-AIS with cockpit, nav and helm station mics Recieve only AIS redundant to primary AIS.
Garmin GPSMAP-7212 touch screen chartplotter/radar in pilothouse
Garmin GMR 18HD radar
B&G Zeus 9” chartplotter in cockpit (new 2015)
Garmin GPSMAP-740 touch screen chartplotter at nav station
Garmin AIS-600 with transmit/silent switch
Garmin GPS-17 module on NMEA network
Garmin GMI-10 multifunction display, 5 in cockpit and helm station, 1 in master cabinGarmin
GWS-10 masthead wind sensor with spare unit
Dual (primary and installed backup) Garmin GHP-12 with control heads in cockpit and pilothouse helm.
Garmin GHC10 autopilot remote control
Autopilot Drive: Dual redundant Garmin Class A electromechanical drives. Separate from main steering system providing steering backup in case of primary steering failure.
Fusion stereo, AM/FM/iPod with pilothouse, and forward and aft cockpit speakers
Hull and Deck Ventilation:
16 Deck hatches, all Lewmar Ocean Series. Accommodation area hatches are equipped with roller shade/screens.
(2) Goiot hatches installed on the hull inboard side as an “escape” hatch.
6) Lewmar Atlantic opening portlights with clear plexi windows, three in each outboard hull side
Lewmar Atlantic model opening port is located adjacent to each double berth
Cowl vents in engine rooms and in each head
Hella fans, two in each double berth, one in the galley, one each in the pilothouse helmstation and nav area.
Provided by (2) Espar diesel fired heaters
Rails and Lifelines:
Custom fabricated SS stanchions and lifelines.
Custom fabricated polished SS pushpits
(4) SS Transom grab rails
Integral swim step on rudder
Custom boarding ladder
Dual bow anchor rollers enable two anchors to be easily used at the same time.
Lewmar V4, windlass with rope/chain gypsy and dual direction switch.
Self-bailing lockers for self stowing chain and rode.
Primary anchor 88 lb. Rocna with 66’ of 3/8” H.T. chain and 250' of 3/4” anchor rode.
Second anchor is a Spade A140 with 20' of 1/4” chain and 200' of 5/8" rode.
Cleats and Docklines
Eight 12" docking cleats
Two 12” mooring cleats
Five (5) 5/8" 3 strand nylon docking lines each 50' in length are supplied.
LED masthead Tri-color and anchor light
Mast mounted steaming light with deck flood light
LED deck level running lights
Cockpit, dimmable LED
Aft deck, dimmable LED lights
Aft deck floodlights
Varnished laminated Bamboo cabinet door frames, fiddles and trim.
Beautiful custom painted soles in accommodation spaces with durable clear urethane finish.
Semi-gloss polyurethane finish on hull, deck and bulkheads in accommodation areas
Attractive stain resistant fabric for pilothouse settee seats and other cushions.
Port and starboard settee seats both have a varnished wood table. Port side table is a movable “coffee table”. Starboard side table is a dining table configured so that it can be moved on the aft deck for open air dining. Settee seats have partitioned stowage beneath via lift out covers in the seat top.
Inside Helm Station
A 30” destroyer type wheel is mounted to starboard with a 4" flush mount Ritchie SS-2000 compass, engine instrument panels, electronic gear shift/throttle control and sailing instruments (depth,wind,speed) located within easy reach of the wheel.
Pilot House Nav. Station
Extra large chart table measuring 55" x 34" with full size chart drawer beneath
Ample space for nav and satcom gear.
Extra outlets for laptop computers, printer, etc..
Tank Tender, 6 tank monitor
High strength, race boat style, Dyneema knotless net.
Bimini top and mounts, dinghy hoist and dinghy tie downs built into the aft deck
Four large lockers along the forward side of aft deck for stowage.
Dual flush mount electric induction cookers.
Two 120v outlets for other cooking appliances
Galley sink is a deep polished stainless steel with strainers set flush into a Granicoat counter top.
Hot and cold pressurized water delivered by single lever mixer.
Ample drawers, lockers and shelves for storage. Built in trash container.
A custom fabricated side by side refrigerator/ freezer (7 and 5 cu/ft capacity) is located in the galley, inboard side. Adjustable shelves included in each compartment. Each unit uses a separate highly efficient SeaFrost compressor with electronic control thermostat providing redundancy.
Each hull has a separate aft cabin which contains a large double berth, hanging locker, built in dresser, two bench seats with additional stowage beneath seats and berth. A deck hatch and opening ports provide excellent cross ventilation.
Each hull has a sleeping cabin amidships that contains a large queen sized berth (66"x80"). A hanging locker, built in dresser, storage cabinet and bookshelf is included. A large deck hatch and two opening ports provide ventilation.
Forward in each hull is a head and shower compartment.
Toilets are custom composite bowls for light weight with manual water pump.
Toilets are plumbed to holding tank with valves for overboard discharge as well as pump out.
Each head is equipped with a vanity with polished stainless steel sink with hot/cold pressure water via a chromed single lever mixer. Granicoat laminate counter top and stowage locker beneath. Two large stowage lockers with shelves for towels, etc. are within easy reach.
Semi-gloss polyurethane finish for easy cleanup
Hot/cold pressure water with mixer
Manual sump pump
Domestic Hot Water Heater
Isotemp 50 liter domestic hot water tank, engine heated with electrical backup.
A hot and cold water pressurized rinse station is installed on the hull transom boarding platform.
Freshwater hose bibs located in cockpit and aft deck.
Workbench (port hull)
Polished SS counter with mounted vice
Drawers and lockers below for tool and parts storage
Splendide clothes washer/dryer mounted in locker above workbench
Lockers above for stowage
The entire above water line exterior of the boat is spray painted with linear polyurethane (Alexseal™) polyurethane coating. Walking areas are non-skid finished. Contrasting painted boot and sheer stripe.
Hull Rub Rail
An external rub rail with solid metal cap.
MA2-75FE Fireboy - Automatic fire suppression system
Three portable fire extinguishers.
Achilles 12’ air floor 2015, Nissan 9.8 4-stroke (2011).
Extensive spares and ancillarys
2 chairs in pilothouse
Bedding, towels, table cloths etc etc
Extensive galley equipment,
Personal tool kit and owners accoutrements are not included.