Additional Specs, Equipment and Information:
Specs
Builder: Beneteau
Designer: Groupe FINOT
Keel: Other
Hull Shape: Monohull
Dimensions
LOA: 11.48 m
Beam: 3.92 m
LWL: 11.13 m
Maximum Draft: 1.90 m
Displacement: 6515 kgs Dry Load
Engines
Engine Brand: Yanmar
Engine Power: 29 KW
Engine Model: 3YM30
Engine Type: Inboard
Drive Type: Shaft Drive
Propeller: 3 blade propeller
Year Built: 2012
Tanks
Fresh Water Tanks: Plastic (346 Litres)
Fuel Tanks: Plastic (130 Litres)
Holding Tanks: Plastic (80 Litres)
Construction
Design made following European Directive requirements and according to EC certification
Monolithic hull design in polyester
Monolithic structural counter moulding laminated and stuck to hull
Deck in balsa and glass fibre sandwich covered in «diamond point» type non-slip surface
Deck hull join screwed, stuck and banded with 1 soild wood bulwark, screwed
Cast iron keel fixed with bolts and stainless steel veneer and stuck
Hung rudder with stainless steel stock
White coloured hull -
Hull decorated in pearl grey
Cockpit bottom self bailing in polyester1 Wet locker to port (Life raft storage, Gas box 2 bottles)
1 Starboard locker (Sail locker)
1 Locker next to tiller seat to starboard
Cockpit benches decked in natural solid wood
1 Steering wheel console: Leather covered steering wheel ( 1100 mm diameter) - 1 Rudder system on column - 1 metal cable transmission system - 1 Stainless steel guard rail - navigation instrument stand (optional instruments) - 1 Compass on binnacle
Engine control - Control panel to starboard
1 Deck hole for access to tiller system - 1 Emergency tiller
Companionway hatch and door in PMMA
MOORING -ANCHORING
Self-bailing chain locker - Clench bolt - Hatch cover
1 Stainless steel bow fitting - 1 Stem roller
Mechanically welded stainless steel roller
6 Aluminium mooring cleats - Stainless steel deck line protection
INVENTORY
TRIM LEVEL : ELEGANCE 2012
1 SIMRAD IS20 GRAPHIC DISPLAYS (LOCH SPEEDO DEPTH SOUNDER)
1000W ELECTRIC WINDLASS - REMOTE CONTROL
FORECABIN : HIGH CUPBOARDS ALONG HULL - DRAWER BENEATH BERTH
REMOVABLE SEAT
RADIO CD/MP3 PLAYER + 2 EXTERIOR SPEAKERS + 2 INTERIOR SPEAKERS
LED NAVIGATION LIGHTS - INSIDE LIGHTS
FULL 220V CIRCUIT (INTERIOR SOCKETS - 25 AMP BATTERY CHARGER - SHORE
SUPPLY)
1 ADDITIONAL 110 AMP SERVICE BATTERY
GRP AND WOOD COCKPIT TABLE - 12V SOCKET - LAMP WITH SHADE - WHITE PVC
PROTECTIVE COVER
FRESH WATER SHORE SUPPLY
COCKPIT SHOWER WITH HOT AND COLD WATER
WOOD COVERED COMPANIONWAY STEPS
SALOON : LEATHER COVERING ON STAINLESS STEEL HANDRAILS + STAINLESS
STEEL BEADINGS ON TO SHELVES
FORECABIN : MIRROR ON FORWARD BULKHEAD
GALLEY : FRESHWATER / SEAWATER FOOT PUMP
AFT HEAD : 1 ADDITIONAL MIRROR - TIMER FOR SHOWER DRAINAGE AFT CABIN(S): 2 OPENING PORTS TO PORT SIDE (COCKPIT AND TRANSOM SKIRT)
OCEANAIR BLINDS/MOSQUITO NETS ON DECK HATCHES
PACK : ELECTRONIC 2012 SIMRAD
1 IS20 GRAPHIC DISPLAY (WINDVANE - ANEMOMETER)
STEERING CONSOLE : NSS8 COLOUR LED 8' TACTILE MULTIFUNCTION DISPLAY
(GPS - PLOTTER - CHART READER - CHARTS NOT INCLUDED - NAVIONICS SILVER
CARTOGRAPHY INCLUDED )
PC INTERFACE
PACK : DOCKING
SIDE OPENINGS IN GUARDRAILS
ADDITIONAL STEMHEAD ROLLER
WHITE PVC COVERS FOR STEERING WHEEL AND CONSOLE
MOORING - MOORING LINES - FENDERS
OTHER OPTIONS
SIMRAD AUTOPILOT AP24 (WITH GYRO COMPASS)
VHF SIMRAD RS25 DSC
2 FLAG HALYARDS
PERLE GREY SPRAYHOOD
Accommodation
FITTINGS
Alpi woodwork in fruit tree colour
Parquet type laminated floors
Hull spar ceilings in cabins + in the saloon
COMPANIONWAY
Height to deck beam: 1.93 m
Companionway and steps in polyester
2 Stainless steel guardrails (Version 2 aft cabin(s)) - 1 Stainless steel guardrails (Version 1 aft cabin(s))
1 Fixed zenital window with curtain
FORWARD CABIN
Height to deck beam: 1.91 m
Central double bed (2.10 m x 0.42 m x 1.87 m), Marine mattress
Hanging locker - shelves - Cubby hole lockers - Storage - Dressing table
1 Removable seat
1 Opening hatch(es) with curtain
SALOON
Height to deck beam: 1.92 m
U shaped saloon bench to port, double density foam
1 Starboard bench seat
4 Matching decorative cushions
Saloon table with wooden mounting
Cubby hole lockers - Storage space along the hull - Bar storage space - Storage under bench seats
1 Port side window with curtain
1 Starboard side window with curtain
2 opening porthole in side window - To port
1 opening porthole in side window - To starboard
2 Hull portholes with curtain
1 Opening deck hatch(es) with curtain
GALLEY
Height to deck beam: 1.92 m
L-shaped kitchen
White laminated worktop
2 Rectangular stainless steel sinks
1 Mixer tap cold water / hot under pressure
1 2 hob gas cooker on mounting - 1 safety bar
1 Refrigerator 110 litre front opening - Refrigeration unit 12 V
1 Dresser with drain system - Closure / Cutting board
Cupboard - Fitted storage space and lockers
1 Rubbish bin
Mechanicals
Engine Yanmar Diesel 29 hp
Engine control - fitted in cockpit
Engine compartment: Soundproofing foam - Ventilation: 1 air intake and 1 pressured air outlet
1 ALTERNATOR 12 V / 80 Ah
1 Rotation moulded diesel tank 130 L (under starboard aft berth) - Electronic gauge - Low level alarm - 1 Deck filler
Filters: Sea water - Diesel - Decanter
Stainless steel shaft line - Polyester guard moulded into hull
Fixed three blade propeller
1 Engine access through companionway (opening with 2 gas pistons)
2 Engine access through aft cabins (3 cabin version) or in the washroom and the aft cabin (2 cabin version)
Electrics
12V circuit
1 service batteries 110 Amperes (Port aft cabin)
1 Battery for engine 70 Amperes (Port aft cabin)
1 Charge divider
Electrical panel 12 V (Fuses - Voltmeter - 1 Water gauge - 1 Fuel gauge - 1 Low battery charge warning - 1 Low diesel and water tank warning)
1 Socket(s)12 V
Lighting: 1 Fluorescent lamp White, Halogen ceiling lights, 1 White/red light fitting
Navigation lights: 1 navigation light(s)fore and aft - 1 Engine navigation light / Crosstree light forward of mast - 1 Mooring light on masthead
RIGGING
Standard mast 9/10 electro-polished aluminium installed on the deck, 2 level(s) of advanced cross trees
Boom in anodised aluminium
Standing rigging in single-strand stainless steel (Forestay, Shrouds, Lower shroud, Backstay)
2 Backstays with turnbuckles
1 Forestay Classical
1 Rigid boom down-haul with tackle
1 Genoa furling system with drum on the deck
1 Mainsail sheet track
2 genoa sheet tracks with piston adjusted traveller cars - 2 Genoa sheet return blocks
Rigging run back to cockpit (except boom topping lift - Foot tuning line)
Complete running rigging: 1 Main halyard - 1 genoa halyard with clutch on mast and cleat - Boom topping lift with cleat on mast - 1 Mainsail foot - 1 Main sheet on traveller - 2 Genoa sheets - 2 fast reefing ropes
5 clutches to port
3 Bollards
WINCHES
2 Self-tailing genoa sheet winches (H46.2 STC)
1 Rigging winch self tailing on deck house port side (H35.2 STC)
1 Winch handle aluminium
1 Winch handle box
SAILS
1 Furling genoa with UV protective strip
Semi full batten written sail with slider and roller slider
Lazy Jack and Easy bag in Perle colour
I : 13.98m
J : 4.55m
P : 13.25m
E : 3.90m
Mainsail area (classic) 34.80m
Genoa 105% 33.00m
Delivery and Commissioning
Price Includes Delivery and Commissioning in either South of France or Scotland
Disclaimer
In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.
Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.