Additional Specs, Equipment and Information:
Specs
Designer: Niels Jeppesen
Keel: Other
Hull Shape: Monohull
Dimensions
LOA: 42 ft 3 in
Beam: 16 ft 9 in
LWL: 42 ft 3 in
Minimum Draft: 9 ft 10 in
Maximum Draft: 13 ft 5 in
Displacement: 26455 kgs
Ballast: 10990 kgs
Dry Weight: 11400 kgs
Engine Options
Engine Option 1: 1x Volvo 54 HP
Accommodation
Number of cabins: 3
Number of heads: 2
Hull
- Built in sandwich construction with vinylester and polyester resins with structural compressed foam
- Outer surface of hull in white sprayed Gelcoat (RAL 9010 white) with 3 waterlines in dark grey Gelcoat (RAL 7011 dark grey)
- Hull moulded in female moulds for highest quality surface finish
- Structural bulkhead in marine plywood varying in thickness from 16-30 mm
- Steel frame - hot-galvanised, high strength, laminated into hull to absorb all loads from keel mast and rigging
- Single point hoist for easy and safe lifting and launching of the yacht
- Bathing platform incorporated in transom port with electrical hoisting and lowering system
- Bathing ladder in stainless steel mounted onto bathing platform
- Continuous stainless steel rail protection mounted on sheerline
- Hull recessed portlights - X-Yachts style (4 pcs)
Deck
- Built in sandwich construction with vinylester and polyester resins with structural compressed foam
- Bi-directional E-glass strategically positioned for strength and weight optimization
- Outer surface of deck in white sprayed Gelcoat (RAL 9010 white)
- Deck and locker lids moulded in female moulds for highest quality surface finish
- Teak deck, vacuum applied, 9 mm nominal thickness on side deck, coach roof, cockpit sole, seats and bathing platform
- Bulwark with teak capping incorporated in deck/hull design
- Anchor locker - drained with space for anchor chain
- Gas locker for 2 x 3 kg gas bottle (1 x 3 kg is delivered with the yacht)
- Space for a 6 man life raft in one of the large cockpit lockers
- Gas springs fitted to all cockpit lockers (4 pcs)
- Cockpit table with space for navigation instruments (see extras) and compass
Accommodations
- Xc 42 available in two and three cabin layout
- First class craftsmanship characterises wooden interior with minimum number of visible screws
- Pre-selected, top grade teak veneer throughout yacht, hand polished and varnished to satin finish
- Bulkheads in various thickness bonded to hull
- Bulkheads with white laminate surfaces with recessed teak panel looks
- GRP deck head liner with integrated light fittings
- GRP hull liners fore and aft including heads floors and shower trays
- Floorboards of 20 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge
- Freeboard in cabins of lined vinyl covered 6 mm panel
- Soft white headlining panels in main and owners cabin
- Companionway steps of curved unvarnished teak
- Handrails by entrance and alongside coach roof portlights in main cabin
- Blinds and flyscreen throughout on Oceanair skylights (6 pcs)
Owner's cabin
- Large double wing berth (200cm x 200 cm, max width) with removable centre piece. Marine plywood with ventilation holes for improved ventilation and support for mattress
- Settee to starboard (60 cm)
- Double wardrobe (100 cm x 72 cm) to starboard with shelves and hangers
- Drawers below wardrobe on starboard
- Freeboard cupboards and shelves above berth
- Storage space under owner's berth for bedding
- Inspection hatch in floorboards for access to speed and depth transducers
Owner's Head
- Bulkheads covered with white laminate surfaces
- Manually flushed marine toilet
- Dedicated shower compartment with Plexi glass doors
- Space for optional washing machine (see extras)
- Tabletop and sink in white GRP
- Single lever luxury mixer taps for sink and shower
- Electric pump for shower floor sump, manual operated
- Towel hooks and paper holder in stainless steel
- Mirrors integrated into cupboard doors
Saloon Head
- Bulkheads covered with white laminate surfaces
- Marine toilet, manually flushed
- Tabletop and sink in white GRP
- Mixer taps, single lever luxury for sink and shower
- Electrical pump for shower floor sump, manually operated
- Towel hooks and paper holder in stainless steel
- Mirrors integrated in cupboard doors
Galley
- Galley, U-shaped (150 cm x 154 cm). Large table top made in Camoan white Corian
- Sinks, rectangular recessed stainless steel with single lever mixing tap (2 pcs) incl. 2 cutting boards made of Delrin material
- Cool box, GRP top opened 140 l with 100 mm insulation, built in Isotherm SP, accumulator plate cooled by water cooled Danfoss compressor
- Gas cooker - 3 burner cooker with oven
- Shelves, drawers and lockers with Plexi glass sliding doors provide storage space for cutlery and food
- Waste bin mounted under sinks
Engine
- Main engine Volvo 55 HP 4 cylinder water cooled diesel engine with S-Drive
- Special engine room with sound insulation ensures low noise level in yacht
- Engine easily accessible for service from front through companionway steps and from side through removable panels in aft cabins
- Folding propeller, 3-bladed bronze for S-drive
- Engine control panel and throttle/gear lever placed in starboard cockpit coaming. Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
- Tank in aluminium for fuel in port aft cabin. VDO analogue level gauge, baffles, inspection hatches, separator incl. filter and shut-of valve and deck fill (220 l)
Electrical
- 12 V DC system throughout yacht
- X-Yachts main switch board with 27 automatic fuses and 3 analogue VDO meters
- 12 V DC system for main engine installation
- Combined deck and steaming light fitted
- All cabling terminates in “dry” GRP box fitted behind main electrical panel for added safety
- AGM batteries (total 260 Ah@12 V) securely mounted under main cabin sofa (2 pcs x 130Ah)
- Separate engine spiral-cell battery (55 Ah, 12 V) mounted near main engine for starting of engine and optional generator only. Charging of battery either via engine and/or generator.
- Shore power installation with 10 Amp shore power inlet socket mounted in cockpit. 230V AC distribution box with ground fault circuit breaker and 230 V AC socket mounted at navigation station
- Battery charger and immersion heater connected to 230V AC distribution box
- Charger 12V/50A, mounted
- 12 V halogen lights fitted for general purpose below deck throughout cabins
- Chart table light fitted
- General lights and dome spotlights integrated in inner liner
- Reading lights throughout aft cabin, main cabin and owner's cabin (8 pcs)
Mast and Rigging
- Fractional double spreader, tapered silver anodized aluminium mast stepped on steel frame and specially designed for Xc 42
- Combined deck and steaming light, Windex with light, tube for additional electrical equipment and 2 mast steps fitted
- Silver anodized boom with single line reefing and internal boom outhaul with control on boom, telescopic vang and outer purchase block system
Standing Rigging
- Split backstay fitted with single Navtec 10 integral backstay adjuster on port side and turnbuckle on starboard
- Tip cups in stainless steel fitted to stainless steel tie rods (2 pcs)
- Discontinuous rod rigging throughout with rod turnbuckles
- Chain plates in stainless steel for forestay and split backstay (3 pcs)
Running Rigging
- Spectra halyards, sheets and control lines led back to cockpit for easy handling:
- Main halyard 12 mm
- Genoa halyard 12 mm
- Mast head spinnaker halyard 12 mm
- Spectra and polyester control and reefing lines:
- Mainsheet 10 mm
- Genoa Sheet 12 mm
- Reef 1 10 mm
- Reef 2 10 mm
- Furling control line 10 mm
- Outhaul 8 mm
- Vang control line 8 mm
Accessories
- Flag pole, teak with bronze bushing (1 pcs)
- Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht (3 pcs) and one fire blanket
- Fenders, white air-filled with lanyards and X-Yachts logo (4 pcs)
- Mooring ropes, polyester 20 m x 14 mm (2 pcs)