PALADIN is a Sparkman & Stephens design, constructed in New Zealand at the Wellington Boat Mfg. yard, with a cold molded composite construction. In 2015 a major refit was done at the KKMI Richmond yard, upgrading the electrical systems and replacing the standing rigging. It is a well built, fast hull sign with a voluminous interior that would serve well as a fast cruiser or a live aboard.
For additional information and showing of this quality yacht please contact listing agent Bill Adams. I am always available on my mobile phone at 415-425-5099 or send an e-mail: email@example.com
Please contact Bill Adams at (415-425-5099
Additional Specs, Equipment and Information:
LOA: 45 ft 0 in
Beam: 14 ft 6 in
Maximum Draft: 7 ft 8 in
Displacement: 20000 lbs
12V Alternator on the auxiliary engine charging batteries
Master Volt Whisper 3.5 KW diesel generator
House Bank Batteries 2 x 8D AGM 12V Batteries
Engine Start Bank Gr 24 x 12V AGM Battery
Generator Start Gr 24 12V AGM Battery
Hull and Deck Construction
Hull was cold molded wood epoxy construction with FRP laminate on the hull exterior and decks.
The wood used in the vessel was reported to be New Zealand Kauri wood.
The deck is plywood construction with an FRP coating and painted non-skid applied to the exterior plywood surface. The deck structure is made up of the plywood sheathing and laminated transverse deck beams.
Volvo Penta MD2040 three cylinder inboard diesel has replaced the original engine.
Transmission Volvo Penta model MS15A-A
Dripless shaft seal
Three blade 18" diameter propeller 11 pitch bronze
Standing rigging was replaced in 2015 at KKMI Richmond
Autopilot Raymarine ST7001
Maxwell vertical drum electric anchor winch (2015)
Fortress FX-23 Aluminum anchor
Sails and Rigging
Keel steppe mast
Tripple spreaer rig
Running back stays
Harken roller furling with foil
Rod rigging (2015)
Lewmar #65 three speed primary winches
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.