• 2017 Mercury Mercruiser 4.5L inboard engine 
• Producing 250hp
• Mercury throttle controls with tilt
• Bennett trim tabs
• RPM, Trim, Fuel and Speed gauges located at helm

• x2 Batteries 
• Battery isolator switch
• Engine bay blower
• Garmin Fish finder 140
• ICOM VHF
• Stereo system 
• Sony speakers
• Wiper
• Electric bilge pump
• Electric anchor windlass
• Cabin lighting 
• Cockpit lighting 
• Navigation lights
• 12v socket
• Shore power 

• Richie compass mounted to helm 
• SIMRAD CE32 GPS/ Chart plotter 

• Folding door into cabin
• "Port a potty" fitted to the Starboard side with folding panel above
• Infill cushions which create a 'V' shaped berth
• Storage beneath berth 
• Side pockets on both sides
• Central hatch and port holes on both sides which let in lots of natural lighting

• Stainless steel boarding ladder onto swim platform
• Swim platform fitted with stainless steel grab handles
• Rear bench style seating with removable sections for further cockpit space
• Side cushions fitted along the edge of cockpit 
• Numerous fishing rod holders in cockpit 
• Starboard side deck locker 
• Starboard side mounted shower
• Additional seating before helm and navigators position fitted with storage beneath
• Port side tackle box storage
• Rotating/adjustable helm and navigators seating fitted with arm rest supports
• Port and Starboard side pocket storage 
• Cupholders located on both sides
• Opening windows on both sides
• Radio/VHF hatch fitted to helm position 
• Steps to bow fitted to both sides with stainless steel grab rails alongside
• Bow locker 

• Box covers

The Boston Whaler 23 Conquest is versatile enough to handle inshore and offshore responsibilities. It's got a lockable cuddy cabin with V-berth and room for a portable or plumbed head. The raised-deck bow walkaround is flanked by a heavy-duty stainless steel bow rail for safe bow access. And an all-fiberglass self-bailing cockpit reduces maintenance. The standard seating arrangement features adjustable helm and companion pedestal seats, aft-facing seats convenient for rigging, lounging or keeping an eye on skiers, and a sturdy, comfortable stern seat which folds flush to the transom for optimum cockpit space. In addition to the storage under the cabin berth, the 23 Conquest features under-gunnel rod racks both port and starboard and an in-deck storage locker - fishbox starboard. BOSTON WHALER: The center console layout, a Boston Whaler innovation, raised eyebrows back in 1961. By moving the helm from the starboard side to the center of the craft, boaters got better steering control and an even keel. With more room to move around, they got better fish-fighting capabilities. Now, countless manufacturers use this layout for their fishing boats. For 1996, Boston Whaler introduced the Accutrack hull. This system combines the smooth ride of a deep-V design with the dry ride provided by strategically placed chines. A Boston Whaler has a distinct style. The distinctive Whaler 'smirk' - a reverse chine and forward spray rail - catches spray and redirects it beneath the hull. In a following sea, it pushes the bow up for better steerage and improved safety. Thoughtful layouts put amenities such as prep stations and controls within easy reach. Seats can handle hundreds of pounds in static loads. Coaming pads are scaled to catch people above the knees. Helms have unobstructed views. And fishing areas provide optimum freedom of movement. Boston Whaler's Unibond construction starts with steel-reinforced hull molds to ensure consistency. Gel coat is sprayed into the mold to create what will be the hull's exterior, a skin coat of fiberglass is applied, varying biaxial and biaxial fiberglass sheets are coated with resin and hand-rolled into place. The deck mold is lowered into the hull mold and the two are latched together to form a closed mold system. Liquid structural foam fills the cavity between the hull and deck. The access plate is secured, and the foam bonds permanently to the resin and fiberglass. No screws, rivets or adhesives are necessary since the hull and deck form a single unit. Boston Whaler's lifting eyes extend completely through the Unibond hull, they are reinforced for maximum towing and lifting strength. On all Whalers, cleats are generously sized. Hinges are solid stainless steel, not stamped and rolled. Fittings are recessed wherever possible to spare toes and to promote long life. Boston Whaler uses noncorrosive, welded, 316 stainless steel for its bow rails, to prevent water penetration, bleeding, rusting and staining. Fasteners are chrome-plated over the stainless for extra insurance against corrosion in the saltwater environment. Boston Whaler has a custom synthetic material made to back their fittings. This 'Whale board' is impervious to moisture, as strong as aluminum and has twice the holding power of mahogany All seats and seat bases on Boston Whalers are made of rot-proof, maintenance-free composite materials. Boston Whaler makes its own custom wiring harnesses specially designed to prevent corrosion. The company uses shrink-tube electrical connectors and tinned copper wiring, waterproof switches and circuit breakers. Boston Whaler cockpits are all finished fiberglass, pretty much anywhere you might set your feet a molded-in nonskid surface offers good traction. Interior surfaces, including the bilge, are clean, smooth, finished gel coat, there's no raw fibreglass to trap stagnant water and debris.

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website at www.watersideboatsales.com

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
Sail drive and shaft seals are more than 5 years of age
Gas hoses and regulators are over 5 years old
Standing rigging and sails are more than 10 years old

NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.