Engine
Yanmar 3HM35F
Total Power
30hp
Engine Hours
3271
Class
Cutter
Length
10.36m
Year
1990
Model
34
Capacity
-
Associated Yacht Brokers of Mexico
Boat Details
Description
"SAL" is a great example of the Bill Crealock designed Pacific Seacraft 34, considered by many as the encore to his remarkable Crealock 37. The Pacific Seacraft 34 is always on the short list for those that want long range extended cruising capabilities, and also a great choice for coastal and inland passage trips with family and friends.
Below the waterline the long cruising fin keel will get you into places other boats can't get to. SAL features a reliable 30hp Yanmar diesel, Harken furling, full set of sails, air conditioning and much more! She's designed for safety and comfort in mind, a tough boat with a seakindly nature well suited for blue-water passage making for couples.
Located right here in the heart of paradise, La Paz, Mexico, the gateway to the Sea of Cortez. Dozens of gorgeous anchorages all within a days sail of downtown. White sand beaches, warm crystal clear water await you and your cruising dreams. Check our her full equipment and let the experts at La Paz Yachts, show you how easy it is to begin your cruising dreams today.
Contact Information
Other Details
Interior walkthrough
Coming down the (4) steps companionway, the U shape galley is to port and across from it on the starboard is the navigation table with instruments and the main electric panel. Aaft the navigation table is a single quarter berth. Continuing forward is the salon with a long straight settee on each side and a drop-leaf table in the center. Table can drop down and turn to a double berth. Forward to port is the head. The head door doubles as the V-berth door too when the head is open. Across from the head is a hanging locker and at the bow a V-berth with an access to the chain-locker.
Accommodations: (6) sleeping places: Double in V-berth, salon table drops to form another double in the salon, single bunk on starboard side settee in the salon and a single quarter berth on starboard side abaft the navigation table. Heads: On port side between salon and V-berth.
Cabin Bright Work, Headliners ,Joinery & Finish: All teak wood, low wear & tear for a 31-year-old boat.
Cabin Sole: Teak & Holy, average wear & tear.
Galley
- Sinks: Double stainless-steel deep sinks.
- Refrigeration: “Technautics” 12 VDC. Compressor is located on the left side of the sink under the trash bin.
- Stove/Oven: “Force 10” (2) flames LPG gimbled stove with oven.
- Accessories: Dishes. No cutleries nor pots & pans.
- LPG System: Propane. System has (2) aluminum tanks, a regulator, a pressure gauge and an electric solenoid – all in good condition.
- Shut-Offs: A solenoid control panel is next to companionway steps on the galley side. A remote switch is on the main electric-board.
Navigation and electronics
- VHF: Standard Horizon
- Handheld VHF: Yes
- GPS: Furuno GP 31
- Chart Plotter: SiTex EC7FI
- Autopilot: Autohelm ST6000 Piston
- Speed Log: Yes, disconnected. Thruhull is plugged.
- Echo Sounder: Yes
- Fish Finder: Yes. Integrated with the chart plotter.
- Tridata screens: Autohelm TRIDATA.
- Compass: Ritchie
- Barometer: Weems & Plath
- Speakers: Dual “Poly Planner” speakers in the salon
Electrical
- DC/AC power: 12 VDC / 125 VAC
- D.C System: Service Bank - 2 LTH 31T / Solar Batteries (Deep cycle, Lead acid wet cell, maintenance free)
Start - 1 LTH 31T / Solar Battery (Deep cycle, Lead acid wet cell, maintenance free) - Main Battery Switch: Rotary switch with (4) positions: 1, 2, OFF, 1+2.
- Panel: Located on the port side next to navigation table.
- Breakers/Fuses: Circuit breakers
- Charger: “Statpower” model “True Charge” 40 Amps.
- Alternator: After-market high output “Nissan”, 100 amps. The original alternator is on-board as a spare part and is operable
- Shore Power: 110 VAC.
- Shore Power Inlet: “Hubbel” 30 / 125.
- DC/AC Inverter: “Statpower Prosine”, 1800 Watts output, 12 VDC - 120 VAC
Mechanical
- Propulsion: Inboard diesel engine, freshwater cooled, naturally aspirated, wet exhaust.
- Shut down: Mechanical pull-cord.
- Prop Shafts: 1” stainless-steel.
- Engine Alarms: Gauges and an alarm light.
- Cooling system: Freshwater cooled by raw-water heat exchanger.
- Filters: Double “Racor” water separator model 500 FG assembly allows to change a filter while the engine is still running.
- Raw Water Strainers: Bronze
- Transmission: Kanzaki/Hurth.
- Drive Type: Direct drive.
- Propeller: 15 X 9, 3 blades bronze propeller
- Prop. Shaft : The FRP shaft log comes out from an FRP extension of the keel that connects the keel with the rudder skeg. Approx. 1” between the end of the shaft log and the propeller. No strut needed.
- Fuel Tanks: Single tank, aluminum.
- Fresh Water System Storage Tanks: FRP hull integrated (3) tanks: (2) X 35 G. and (1) X 15 G. Total of 85 G.
- Accumulator Tank: “Jabsco” 1 liter model 12573 – 2000.
- Pumps: “Shurflo” model 220-213-34. Operable.
- Sanitation System: Single “Groco” manual head.
- Shower Drain Pumps: “Jabsco – PAR” model 37202 – 0000.
- Sump: Water are discharged directly from the shower drain over-board.
- AC: “Mermaid Marine Air”, single unit located in the V-berth hanging locker, 5,200 BTU capacity.
Deck and hull
- Deck Material: FG and molded nonskid pattern. Good condition.
- Exterior Hull: Off-white gelcoat with a wood rubrail along both sides of the hull.
- Portlights: Total of (9) bronze portlights
- Transom: Canoe shape.
- Bilge: Round bilge with a deeper section at midship.
- Stanchions: 1” diameter stainless-steel tubes, 30” above deck.
- Bow Pulpit: Double 1” diameter stainless-steel tubes, 30” high.
- Windlass: Mounted on a solid block of wood, thru-bolted and with bedding compound.
- Anchor Platform: Stainless-steel, double roller assembly for (2) anchors. Thru-bolted and with bedding compound.
- Hawse pipes: All (3) anchor-chains (two bow and single stern) have a bronze hawse pipe. (2) with a lid to prevent water leaking inside. Main anchor hawse pipe is angled at 90 degrees for the same reason.
- Grab Rail: Wooden grab-rails are mounted on coach-roof.
- Toe Rails: FG
- Ventilation: (2) bronze Dorade vents on forward deck. Also, (2) forward opening dark tinted top hatches sized to be an escape hatch in a case of emergency.
- Cleats: (2) 12” bronze bow mooring cleats, (2) 10” bronze stern mooring cleats and (2) bronze midship cleats.
- Pushpit: Double 1” diameter stainless-steel tubes, 30” high. Solid, adequate. Good condition.
- Outboard davit: Manual “Forespar” with folding boom.
- Blocks: Blocks are attached to the mast step on deck to lead the lines through fair leads to the cockpit.
- Scuppers: A deck scupper on each side and (2) cockpit scuppers.
- Chocks: Bronze chocks for aft cleats and Panama Chocks integrated in the bulwark for bow cleats.
- Condition of Bottom Paint: In general good condition.
- Windlass: Vertical shaft “Muir” with chain gypsy and a rope drum. UP/DOWN push buttons are deck mounted.
- Main anchor - CQR 35 lbs. 80’ of 3/8” galvanized steel & 200’ of 5/8” Nylon rope
- Secondary - Bruce 22 lbs. 50’ of 5/16” galvanized steel & 150’ of Nylon rope
- Stern anchor - Danforth 18 lbs. Approx. 20’ of chain Approx. 100’ Nylon rope
- Dinghy: 3 person 8ft inflatable dinghy and 2 stroke outboard engine
- Accessories: Boat-hook, (4) fenders, mooring lines, 9’ West Marine roll-up inflatable dinghy, outboard engine mount.
Sails and rigging
- Steering: Mechanical, quadrant and cables, single station in aft cockpit.
- Emergency Tiller: Stored in the shallow port side cockpit locker. Stainless-steel tiller.
- Type of rig: Masthead sloop.
- Sails: Main sail, partially battened, in good condition
Head sail 115% Genoa, Doyle, in good condition
Head sail #2 130% Genoa, in good condition
Asymmetric Spinnaker, in a sock, like new. - Standing rigging: Aluminum spars with stainless-steel 1X19 wire. All standing rigging cables replaced by “Dawn Rigging” in La Paz, BCS in Nov. 2020. Chain plates, toggles and turn buckles were checked but not replaced.
- Spreaders: One set of straight angle spreaders. Chainplates: Stainless-steel external.
- Mast step: Step on deck.
- Sizes: Back stay, both shrouds, all (4) lower shrouds are ¼”. Forestay is 5/16”. Adequate based on the specs written in the “Pacific Seacraft Crealock 34” manual book.
- Furling system: “Harken”.
- Boom vang: Block & Tackle. No rigid vang.
- Running rigging: All running rigging is in fair to good condition.
Safety
- PFD’s: Type I (2) and Type III (1)
- Fire Extinguishers: Extinguisher type B:C size 1 – (2) USCG approved.
- Visual Distress Signals: (3) Handheld flares expired on Feb. 2009 and Distress flag.
- Navigation Lights: Operable.
- Search Light: Yes
- Man Overboard System: “Life-Sling 2”.
- Bilge pumps: (1) Rule 2000 Electrical, submersible and (1) Manual
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Propulsion
Engine Make:Yanmar
Engine Model:3HM35F
Total Power:30hp
Engine Hours:3271
Engine Type:Inboard
Drive Type:Direct Drive
Fuel Type:Diesel
Propeller Type:3 Blade
Propeller Material:Bronze
Specifications
Dimensions
Length Overall:10.39m
Max Draft:1.5m
Beam:3.05m
Length at Waterline:8m
Miscellaneous
Hull Material:Fibreglass
Tanks
Fresh Water Tank:321.76 l
Fuel Tank:132.49 l
Holding Tank: