Many believe the Marlow 58 is the perfect size for a family yacht.  She was built with folding electronics on the hardtop so she can do the "Great Loop"   She has all the best equipment and stabilization available, with a Seakeeper Gyro and Naiad fin stabilizer system. She is comfortable at 8-10 knots with trawler like efficiency but will cruise at 21-22 knots all day too. The Marlow Explorer is one of a few yachts in the world that provide the ability to function very efficiently at either speed.    This 58E has a custom layout that provides a full beam center line Master stateroom with his and hers heads, a queen VIP and a set of bunks to starboard. The crew cabin and engine room are accessed via a set of private stairs on the aft deck.      

This raised deck pilothouse provides an inside and outside helm station.  With wide side decks, a cockpit station, and wireless Yacht Controller, a couple will be able to dock her with ease.   The salon is open to the pilothouse providing a clear view from the aft salon doors to the front Pilothouse windows giving you a great sense of space.    The RIB dingy with 60HP Yamaha outboard is mounted on the Freedom Lift with removable arms so it is easy to use and simple to leave behind on trips where a Dingy is not needed.  This frees up the upper deck behind the fly bridge for entertaining space.    "True North" has a full beam Master Stateroom with His and Hers heads and a VIP with a large head that is shared with a set of bunks to starboard.  There is a nice crew cabin aft, ideal for when you want to take a mate with you.

As you walk in the aft salon doors there is a very comfortable sofa to Starboard.  The sofa is built in but looks like a free-standing piece you would have at home. On the port side there two comfortable chairs with an end table between. The TV is on a lift on the forward end of the room so it is out of sight when not in use. There is a generous size coffee table with two ottomans that fit securely underneath. There is a wine cooler aft and subzero beverage center forward by the stairs to the Galley. Built in Settee Twin chairs with table Coffee table and ottomans Wine Cooler SubZero Drink refrigerator with Ice Maker Large LED TV on lift  

The galley is stunning with her custom granite counter tops, Franke stainless sink, and brushed nickle Grohe faucet. There is a full size 4 burner Décor cooktop, full size Décor oven, and Sharp Microwave. There are 2 sub-zero refrigerator drawers and 2 sub-zero freezer drawers. There is a Fisher Paykel dishwasher. The galley floor is matching granite with stainless dividers.

The pilothouse table is satin teak with a bull nose edge. The settee is to port and is covered in a beautiful upholstery fabric.   The lower helm is a great place to operate the vessel from. You are high enough, and far enough forward, to see the crab pots.  It is always a nice day in the pilothouse. There is a full set of navigation electronics in front of the beautiful teak and ebony wheel. The Stidd Helm Chair is fully adjustable and has a Garmin keypad built into the arm rest. The Gyro control is on the starboard dash and the owner reports it is a great feature in a choppy marina or anchorage.   The main ship's monitoring systems are overhead. All tanks and battery banks are monitored from here. The fin stabilizer controls and Inverter main panel are here as well. There is a graphic of the vessel with indicator lights to show bilge pumps, water pumps, and warning for high exhaust temperature. This panel also has the breakers for the navigation electronics and the switches for the bilge pumps.

Upper and lower helm stations have two 16" touchscreen displays (7616XSV).  The components are networked and either station has all the functions.  The major components are listed below: FLIR Night vision camera Garmin 6KW Radar with 6' open array Garmin autopilot Garmin VHF Radios Garmin AIS Camera system with cameras in engine room and cockpit Satellite Weather KVH Trackvision HD7 WIFI Extender Cell Booster Depth Sounder Wireless Yacht Controller

The interior of the master stateroom is finished in beautiful satin teak. The LED lights are on dimmers and there is a very comfortable custom bound carpet over the teak and holly floors.   The master stateroom is a center-line berth with nightstands and storage drawers on either side. The heads are accessed by port and starboard doors and each side has a toilet and sink area with marble counter tops. There is a full-length mirror in the inside of the port and starboard head doors.   The floors are done in matching granite so you do not have to worry about the water as you get out of the oversized shower that is in the center.   In the stateroom there are hanging lockers and storage drawers on each side that are plenty for cruising. The TV is on the forward starboard side.

The VIP has a queen size berth with several deep storage drawers underneath. There is a cedar lined hanging locker on the port and starboard side. Overhead there are two opening hatches with blackout and bug screens. There is a Samsung TV on the aft wall. The room is finished in satin teak with high gloss teak and holly floors.   The VIP head is very spacious and has a separate shower.  There is a door into the head from the stateroom and from the hallway.  

The Engine Room is beautiful and well lit with bright white bilges. The space is well lit.  Four 24Volt DC fans circulate air in and out.    The 1500 gallon fuel tank is in the forward bulkhead.  The tank is custom built with epoxy fiberglass and is shaped to use all possible space maximizing capacity.  There is a spring loaded Bronze shutoff valve that can be closed from the side deck in an emergency.  All fuel supply lines are stainless steel wherever possible.  At the center of the tank there is a glass sight glass marked off in gallons.    The Caterpillar C-18'S are rated at 1,015 HP each and have 1450 hours on them.  The engines sit on composite stringers made from carbon fiber.   The ZF Transmissions connect to the fluid filled shaft system through an intermediate shaft with two sets of U Joints, increasing efficiency and eliminating any ongoing alignment issues.  This system also eliminates the need for a conventional salt water cooled shaft seal, eliminating any salt water from drive line.  The shaft is fully enclosed in a tube full of synthetic lubrication oil. This system also replaces the conventional cutlass bearing with ball bearings for smooth operation for many years.   The 21.5 KW Onan Generator has 2405 hours on it.  It is outboard of the port engine.  The generator is sized to run all the systems on the boat.  On the aft wall there is a 3.5KW Outback inverter.  The inverter will run all the refrigeration and many other systems for the day, eliminating the need to run the generator all the time.   To Starboard you will find two large Marine Air Chillers.  The Chilled water AC system is much more robust than conventional DX systems and offers complete redundancy. Caterpillar C-18's @1,015 HP Onan 21.5 KW generator 950GPD Bluewater Watermaker 3,500 Watt Outback Inverter 24 Volt Battery Charger 12 Volt Battery Charger 24VDC to 12VDC Converter Marine Air Chilled Water Air Conditioning System Oil Filled Shaft System    

The Yacht is set up to run on 2 50A cords when you are running the AC and can run on one when you don't need AC.  The Inverter powers most of the appliances and outlets so you can run most things without the generator for many hours.   Electrical bonding system 3.5KW Outback inverter   Battery parallel switches  Upgraded AGM Batteries  2 x 200AH batteries for engines, 1 200AH for generator, 4 200AH for House - Inverter 2 X200AH bow thruster batteries  110 Volt and 220 Volt house systems  Overhead 24V lights with dimmers  AC/DC distribution panel with magnetic circuit breakers  Voltage meter for all battery banks  2 Glendinning cablemasters aft, 2 50A receptacles in bow 1 21.5kw Onan Generator with 2405 hours

The flybridge is an excellent place for fair weather cruising and entertaining guests. The twin Stidd helm chairs are very comfortable. The Garmin Electronics package is complete with dual 16" screens, 6kw radar, sounder module and camera system.   The CAT electronic display is immediately forward of the large stainless steel wheel.   The console also has multi-function displays for wind direction, water depth, and boat speed. The VHF and the yacht's intercom phone are within easy reach. The flybridge is protected by a full factory fiberglass hardtop. The flybridge has a four sided poly carbonate enclosure. The flybridge is accessible by stairs from inside the pilothouse and from outside from the cockpit. The flybridge is air-conditioned.  There is comfortable seating aft of the helm chairs and a large table perfect for dining outside. There is a sink, refrigerator with ice maker, and plenty of storage, as well as an electric grill. Twin Stidd Helm Chairs Garmin 16: touchscreens Garmin autopilot Garmin VHF Radios Garmin AIS Camera system with cameras in engine room and cockpit Satellite Weather Refrigerator with ice maker Large seating area with FRP table Factory Hardtop Stainless Steel Sink Under seat storage with drain mats Electric grill Four-sided flybridge enclosure Yacht Controller wireless remote control for engines and bow thruster

Even if you are not sure you want crew, you will find the spacious crew cabin provides great storage. Furthermore, on those family gatherings, no one will feel slighted staying in this space. You may find with the great range of the Marlow Explorer you will want to venture offshore for days at a time and taking on some help is a very nice option.   The Crew Cabin has its own entrance so they do not need to come into the salon to get to their quarters.  There are two nice beds, head and shower, TV, ample storage, and a refrigerator and microwave. 

Marlow Yachts are limited production yachts built under constant supervision and stringent quality control procedures.  Very few products in the world undergo the battery of tests and scrutiny designed to make your yachting experience one of pleasure.  The major vacuum bagged components are built in only three major molds constituting a marvelous technological advance that eliminates dozens of potential leaks and unsightly joint areas.  Resin infusion is extensively used where appropriate.  The Marlow Explorer exterior finish is among the finest on earth and will look like fine porcelain for years to come.  Marlow Yachts are designed and built to cross the oceans of the world in comfort and safety while the proprietary Strut Keel© technology allows inland and island cruising with fully protected running gear. Marlow Yacht's factory operations are capable of producing various yachts compliant with a variety of standards such as ISO 9001, USCG, ABYC, NMMA, CE, Bureau Veritas, Lloyds Register and other governing societies worldwide.  

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information, nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Fuel and water capacities may be affected by layout or mechanical changes.  In a continuing quest to improve its products Marlow Yachts Limited, Inc., and/or its subsidiaries and affiliates, reserve the rights to alter specifications and standards without notice to any party without obligation.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.